1. First of all, we have to polish off the paint layer and surface layer on the floor. This requires a professional large-scale refurbished machine. The corners are polished to a smooth angle using a small angle grinder. Carefully sand the floor to make the floor smooth and delicate.
2. Check if the original side seam has a transparent putty. After the removal, reseal the seam and then apply the primer to the floor.
3, after the primer is dry, brush the first coat of the paint, dry it with water sandpaper, and when the surface layer is slightly rough, go out the powder layer. Brush it 3 to 4 times according to the above procedure, and do not polish it the last time.
4, after the floor paint is completely dry, put on the floor wax, dry and ready to use.
5, before the renovation of the old floor should ensure the cleanliness of the house, moving out all the items in the house.
6, using a large floor renovation machine several times to remove the paint layer, surface layer, wood layer about 1-2 mm, and then carefully sanded to make the surface of the floor delicate and smooth to a new state. The corners of the floor are ground using a small angle grinder for overall smoothing.
7, then putty, coloring, painting, waxing and polishing. We must pay special attention to the step of painting. Generally, the primer is applied once, and the topcoat is applied twice. If the surface of the floor is flawed, it is necessary to brush the primer several times.
8, carefully grind with water sandpaper, the surface layer is ground to a slightly rough, remove the powder.
9, according to the above procedure, brush three to four times the topcoat, the last time does not have to grind. After the last coat is completely dry, put on the floor wax.
Experts remind that not all solid wood flooring is suitable for renovation:
1, ordinary solid wood flooring and three-layer parquet Most of the surface thickness of the product is about 4 mm, so it is generally suitable for renovation.
2, the surface of the laminate has a layer of wear-resistant aluminum oxide, the renovation of the floor will destroy its wear layer, and the floor aging.
3, the thickness of the surface layer of the multi-layer solid wood floor is not equal, the thickness of the thin skin is generally about 0.6 ~ 1 mm, such surface thickness can not be refurbished, and the thick skin can be refurbished.
4, if the old floor has a large area of deformation, cracking, and mildew, then even if the renovation is difficult to repair the original look, like this situation generally needs to replace the new wooden floor.
Relevant recommended products
U Tie Wire, Loop Tie Wire (Double Loop & Single Loop)
PVC Ceiling Panel Decoration Materials
European Standard IPE140 with High Quality
Big Flowrate Single Stage Double Suction Centrifugal Water Pump
CA Series (6 – 14 A) Solar Charge Controller