Will you do about the topic of quartz stone or marble on the bathroom countertop?

   Humans have been making multiple-choice questions since the embryonic period, and faced various choices at all stages of life. As always, the decoration is also about the choice of quartz stone or marble on the bathroom countertop. Many consumers have no choice but to start. As long as they understand the difference between the two, it is not difficult to make a choice.

 1, quartz stone for bathroom countertops or marble-marble countertops

   Marble is formed by sedimentary rocks and its metamorphic rocks, a metamorphic rock formed by the formation of limestone crystals. Its surface stripes are irregularly distributed, with natural and varied textures and diverse colors, which are smart and elegant. The marble countertop has good rigidity, no deformation, high hardness, strong wear resistance, corrosion resistance, high temperature resistance, easy cleaning and maintenance, and overall durability and timelessness. Marble has excellent processing properties and can be cut according to the size. However, the marble countertops are more expensive and easy to stain. For daily cleaning and maintenance, use a slightly damp soft cloth to wipe the products with flexible cleaning ingredients. Because it has a certain amount of radioactivity, although the radiation is low, it is not recommended for large-area use.

  2. Quartz stone or marble in bathroom countertops-quartz stone countertops

  quartz stone is in nature One of the hardest and most abundant minerals, it is a new type of stone synthesized by more than 90% natural quartz crystal plus resin and other trace elements. It has no scratching, no penetration, no old, high temperature resistance. Characteristics, therefore, moisture, antibacterial, anti-staining ability is super strong. Compared with marble countertops, it is non-toxic and non-radiative. It is a non-polluting, reusable environmentally friendly, green decorative material. Although quartz stone countertops are impermeable and non-staining, they are easy to adhere to fingerprints and smudges, and need to be cleaned regularly to keep them clean. Moreover, because the hardness of the stone is too strong, the table top is not easy to process.

   After reading this article, would you do about the quartz counter or marble on the bathroom countertop?

<


Relevant recommended products

Monocrystalline Silicon Solar cells

PP-R One-way Valve-Male of Easy Installation Made in China

WAM Filler Dust Screw Feeders & Conveyors THF-TCF

Vertical Heating Stand Mixer Plastic Drying Machine

260w Poly Solar Panel For Home Use And Power Plant

Tetris furniture: inspiration for video games

Why is the furniture Tetris?

Inspired by the once popular video game in the Soviet Union, this type of home has many important advantages:
This is Functional, I would say, “multi-functional”: you can use it for multiple purposes; it is space-saving (like any assembled furniture); it is fun: you can redesign your apartment, again and again Once again; looks fresh and infectious.


Relevant recommended products

Basalt Roving for Chop High Quality

Ribbon GYDTA Duct, Aerial Optical Cable

Single Sided Medical Rubber Adhesive Tape Wholesale

Steel wire rope of 6*19

Aluminum Household Jumbo Foil Alloy 8011-O 9-20mic from China

The rubber revolution is coming again

The United States will discard approximately 3 million tires per year. Although these rubbers have changed from landfills to fuels. However, the potential of waste rubber can be further stretched.
Ecore is the largest customer of scrap tires in North America. Insiders at Lancaster, Pa., disclose that each year’s recycled rubber production is five million pounds for floor, acoustic and industrial products. Despite this, the president still said that he will further change the characteristics of rubber durability, moisture resistance, impact resistance and sound attenuation to the “floor” industry. After four years of research and development, Itstru’s Ecore technology is introduced, which allows the rubber to lie flat and open the vents, allowing the Ecore laminate to contact almost any surface to reclaim the cushion.
In the 1990s, tire-filled landfills pushed GEM CEO Henry to find a way to use recycled rubber. After success, rubber is used as a key ingredient in the roofing product as a stucco additive.
Rubber has always been a long-term topic. Like vulcanized rubber, it is a very stable, beautiful material, it is very soft, at the same time, yet it is tough and flexible, whether it is warm or cold season. The open dihydrocarbon of the vulcanized natural rubber establishes a crosslinked polymer chain at the molecular level, giving the vulcanized rubber a high elasticity. Until recently, vulcanization was still a permanent process. After decades of research, supported by the National Science Foundation and Nike, Isaiyev has found a way to break the cross-linking chemical bonds with high-powered ultrasound to make the rubber back to the flowing material, which can be heavy again. Plastic. Currently, ultrasonic extruders can process 300 pounds of rubber per hour. If you can convince the tire industry, this is a real alternative when dealing with waste rubber. His goal is 1,000 to 5,000 pounds per hour.



Relevant recommended products

electric traction hoist LTD63 Made in China

Fiberglass Ceiling Good Acoustic Performance White Design

High alumina brick for steel making

ALUMINUM SHEET IN GOOD QULIAYT GOOD PRICE

Formwork Parts Rapid Clamp with Different Surface Treatment

Australia’s third largest iron ore supplier and Hualing to carry out comprehensive strategic cooperation

Hunan Hualing Iron and Steel Group Co., Ltd., which has just become the second largest shareholder of Australia’s third largest iron ore supplier, Fortescue Metals Group Ltd (“FMG”), signed a contract with FMG in Changsha on the 8th. Comprehensive strategic cooperation agreement, the two sides will carry out further cooperation in the fields of iron ore development and sales, non-ferrous metals, engineering construction, equipment procurement and shipping.

In February this year, Valin subscribed FMG 260 million shares to issue new shares, and after purchasing 275 million shares of FMG shares from the US Harbinger Fund, it held a total of 535 million shares of FMG. The equity, representing 17.34% of the total issued share capital, became the second largest shareholder of FMG. Li Xiaowei, chairman of Valin Group, also became a director of FMG. Subsequently, the transaction was approved by the Australian and Chinese government regulatory authorities and completed on April 29.

The Hualing Group, headquartered in Changsha, is one of the few inland steel companies in China that does not have iron ore resources. Iron ore is all dependent on outsourcing. After the equity subscription, Valin signed a business cooperation agreement with FMG. FMG will supply 10 million tons of iron ore to Valin annually at the long-term agreement price of Australia’s iron ore to China. The comprehensive strategic cooperation agreement signed on the 8th is a further expansion of the agreement.

According to Li Xiaowei, the agreement includes joint exploration of ore and non-ferrous metals in Australia, research and development of low-grade iron ore and processing of raw materials with research institutions such as Central South University, and plans to establish a joint venture shipping company to discuss shipping cooperation. Possibility, etc.

Li Xiaowei said that FMG currently has an annual production capacity of 55 million tons of iron ore, and the future plan is to expand production to 95 million tons. In the plan, Valin will coordinate with China’s construction units and financial institutions to actively support FMG to build supporting facilities such as railways and terminals, and expand FMG’s iron ore sales in China. FMG also agreed to prioritize the procurement of construction machinery, train locomotives and other related equipment in Hunan.

FMG CEO Andrew Frost said that the close cooperation between the two parties will make FMG more Chinese, and may promote FMG to list on the Shanghai Stock Exchange, becoming the first foreign ore listed in China. enterprise.




Relevant recommended products

Panel LED 60X60, China Panel Light 60X60

Refractory Ceramic Fiber Paper Fireproof Rigid Insulation

Aluminum Foil Adhesive Tape and Printing

Hot-Dip Galvanized Steel Roof of High Quality with Different Thickness

Horizontal, radially split volute casing pump CPKN

Bathroom decoration affects family fortune, pay attention to these points

Bathroom decoration is very particular about Feng Shui layout. If the bathroom layout is not good, not only the bathroom environment is not good, but also has a great impact on the fortune of the homeowner. A good bathroom feng shui layout has a good effect on the fortune of the whole family. Let’s take a look at the four major feng shui taboos in the bathroom decoration.
bathroom decoration feng shui taboo 1: the direction of the toilet should not be consistent with the direction of the house

Due to the traditional Chinese customary feng shui customs, the direction of the toilet should not be consistent with the direction of the house. For example, the direction of the residential gate is south facing. When the person sits on the toilet, if the face is south, this is the taboo of the toilet and the house, which may cause problems in the health of the family. The direction of the toilet should be adjusted to deviate from or opposite the direction of the home.

Bathroom decoration Feng Shui taboo 2: Bathroom facilities should not be irregular shape

The choice of bathroom facilities is very particular, the shape of the bathtub is generally rectangular or round Kyrgyzstan, regular pentagons, hexagons are also possible, but do not use triangles or irregular shapes, which is not good for the user. And the bathtub should not be too large, mainly for practical use.

Bathroom decoration Feng Shui taboo 3: Bathroom lamp joints should not be exposed

Because the bathroom is relatively humid, be careful when installing lights and wires. It is best to use the safety protection function of the switch of the luminaire, and the connector and socket should not be exposed. If the switch is a seesaw type, it is best to install it outside the door of the bathroom. Otherwise, a moisture-proof and waterproof panel should be used to prevent accidents caused by moisture leakage.

Bathroom decoration Feng Shui taboo four: avoid messy

Bathroom feng shui is the most taboo, which will lead to air stagnation. The bathroom is only suitable for placing the minimum necessities. It is not advisable to put too much debris in the bathroom space, and the cleaning utensils should not be exposed. There should be special storage.
(provided by Shenyang Building Materials Network) <


Relevant recommended products

High Quality Hot Dipped Galvanized Iron Wire For Hexagonal Wire Mesh

Quality Pvc Foam Board gator foam board

2018 PPR Coupling Watering Irrigation used in Industrial Fields from China

304 316L 430 201 Inox Stainless Steel Coil/Sheet/Plate !!!

Steel Sheet Hot Rolled Stainless Steel Thickness 4.0mm

What should I do if the cabinet drawer slides are not working well?

Many cabinets are designed with slide rails, and the slide rails are a more important part of the drawer operation. Sometimes the cabinet drawer slides will be stuck. What should I do? Fixed in the cabinet of the furniture. In the body, the drawers or cabinet plates for furniture enter and exit the movable hardware connecting parts, and the slide rails are suitable for the drawer connection of furniture such as cabinets, furniture, document cabinets, bathroom cabinets and the like.
How to remove the drawer slides?

First of all, you need to make sure that the home is the kind of slide rails, such as three sections of track and two sections of track.

The cabinet is then easily pulled out, but it must be kept in a stable state when pulled out so that it does not hurt the cabinet and the track when it is pulled out. Look again at the sides of the cabinet with pointed buttons. If you see it, try to press down with your hand. If you can press it, you will hear a click, then take out the cabinet.

But don’t use too much force when you press it. If you press it, it means something is stuck, you need to check it. After pressing, gently and keep it flat to remove it, so that it will not cause too much damage to the track. After re-extracting, verify that the track rails of the drawer are deformed or otherwise appear. If deformation is encountered, usually adjust the position of the deformation and fix it. Then put it into it in the original way, which can easily complete the disassembly of the drawer slide and the installation of two major problems.

Now you should know the solution to the lock on the drawer of the cabinet drawer, I hope it will be useful to you.
(provided by Shenyang Building Materials Network) <


Relevant recommended products

XD900 950KGS Skid Steer Loader

PP-R Angle Radiator Brass Ball Valve from China

Nonwoven Geotextile in Vaious of Specifications

JIS U Channel Or GB U Channel 50-300MM Or UPN

Poly Solar Cell 156mmx156mm with Different Effiency

It is important to match the style of the lamp with the space.

Lighting is an indispensable item for every family. It seems that it is very simple to buy and use the favorite lamps. In fact, home lighting has a lot of knowledge. If you are not careful, you will be exposed to light pollution in long-term residence. ,affect health.
Light source selection

  The light source is the basic component and core component that affects the light effect. Knowing the characteristics of the light source, we can better choose the light fixture that suits us.

   incandescent & fluorescent lamp: good versatility

   incandescent lamp is mostly a bulb, the lampshade is plastic, so it has many varieties and versatility. The color of light is close to the color of sunlight, and it can be oriented, scattered, and diffused. It can enhance the stereoscopic effect of the object, but the light conversion rate is low, the heating temperature is high, and it is relatively environmentally friendly.

  Fluorescent lamp is a fluorescent lamp with high light conversion rate, energy saving and high efficiency, but it will produce light decay, color difference, and certain influence on vision.

   energy-saving lamps: high energy-saving light effect

   energy-saving lamps are relatively small in size, energy saving effect is remarkable, but his color rendering is poor, The color that leads to the look is not beautiful enough, but also harmful to health and vision.

  LED lights: small size and environmental protection

  LED lamps are small in size, low in power consumption, long in life, non-toxic and environmentally friendly, and highly decorative It is the main source of light for downlights, but at the same time the price is relatively expensive, and the heat dissipation is not easy to light decay.

  space layout

   After understanding the characteristics of different light sources, we can begin to plan what should be configured in different spaces. The lights are off.

  Brightness matches lighting needs

   On the whole, the living room has to receive guests, the study to read, the restaurant to eat, these are Brighter luminaires should be provided, and the choice of light source is more free; the main function of the bedroom is rest, the brightness is soft (preferably using yellow light); the lighting requirements of the kitchen and bathroom are not high, not too much For the luminaires, the former is better for concentrating and warmer, and the latter is better for energy-saving lamps when the brightness is equivalent.

   matching style and space conditions

  Selecting fixtures should pay attention to the height and size of the space. If the height of the room is less than 3 meters, it is not suitable for the use of long pole chandeliers or high-dip crystal lamps (so the general large chandeliers are suitable for villas or duplex families); the space of 15-18 square meters is 60-80W. The space of 30-40 square meters chooses 100-150W lamps, the area of ​​the lamps should not be larger than 2-3% of the room area (the lamps are small and the lighting is insufficient, and the auxiliary lamps such as floor lamps, spotlights, table lamps, etc. can be added in the space).

  The weight and spacing of the lamps are reasonable

  For the top luminaire, the weight cannot exceed the load-bearing capacity of the top surface, otherwise it will easily occur Dangerous, generally installed directly on the floor of the luminaire, because the floor load is strong, not easy to fall, if installed on the aluminum gusset and ceiling, the light fixtures need to be as light as possible. On the other hand, when planning the luminaires, attention should be paid to a certain distance to ensure visual beauty.

Location combination

   After determining the approximate space requirements, the next step is to refine the positional combination of the luminaires. For ceiling lamps, chandeliers, spotlights, downlights for wall use, wall lamps for wall use, and more mobile floor lamps and table lamps, we often use main body + partial lighting to combine lighting.

  Top: The ceiling lamp/chandelier body satisfies the daily light

  The main light source can generally take these several ways: one is from the top Large and bright chandeliers or ceiling lamps, this way more need to consider whether the space conditions can meet the requirements; the second is the use of incandescent lamps, which is currently used in most ordinary households, but often based on white light The visual protection and the atmosphere create a general effect. The third is to install a single or multi-head chandelier as the main light in the center of the room. The advantage is to create a sense of space and atmosphere.

  Bottom wall: wall lamp/floor lamp auxiliary lighting to create ambience demand

   separate table lamp or floor lamp on one end of the sofa, turn off the main light Let the indirect light scatter in the entire sitting area, so that the host and the guest can talk or browse the newspaper, and the wall lamp can be placed in the appropriate position on the wall to make the wall shine and enrich the lighting level. It is used in corridors, bedrooms and bathrooms. many.

  It should be noted that the installation height of the living room wall lamp is generally controlled at 1.7-1.8m, the degree should be less than 60 watts; the floor lamp should be divided into the upper and the direct type. If the ceiling is light and reflective, you can choose the floor-standing floor lamp. The direct-lit type requires the lower edge of the lampshade to be lower than the eye and preferably has a dimming function.

  Upper and lower ends: Spotlights/downlights emphasize lighting highlights, etc.

 &emspIf you want to emphasize the screen, the living room cabinet TV cabinet, ornaments and collectibles, etc., you can install the projection lamp or use the fluorescent lamp and the downlight to be placed in the laminate to project a point or surface illumination effect. If you have murals, showcases, etc., you can set invisible spotlights to embellish.

  Avoid misunderstandings

   It is impossible to have only one kind of light source in a family. After all kinds of spatial layout and position combination, we should pay attention to some Coordination of details avoids the following particularly obvious misunderstandings:

  light contrast is too strong

   indoor light should be kept as soft and uniform as possible No dazzling and shadows. Some people create special effects in certain spaces. Indoors use luminaires with opaque lampshades to make the interior clear and dark. When the person’s line of sight turns from the bright area to the dark area, the eyes have to adapt to the object for a period of time to see the object. Repolarization easily causes visual fatigue.

  Excessive use of warm light

  The yellowish light is warm light, which can bring us warm and comfortable lighting Environment, so many users like to use warm light. In fact, warm light can provide us with a warmer lighting environment, but its color temperature is low, which is not conducive to learning and reading, so you can not use too much warm light. Like the living room, study and kitchen need light to concentrate, it is more suitable to use neutral white light color (warm color below 3300K, neutral white 3300K-5300K, cool light above 5300K)

  Lights are too messy

  You can’t go to extremes with light colors, don’t design lights to be colorful, it can be dazzling and detrimental to your eyesight. Moreover, too much color is prone to light pollution, and it can seriously interfere with the function of the nerves in the brain’s central nervous system. In addition, unreasonable light color can affect children’s vision development.

   Normally, the color of a room should not exceed 3 colors, and the colors should be coordinated. It is best not to use stimulating light colors in the bedroom, and should avoid strong contrast of colors, avoid red and green. The restaurant can choose yellow and orange lights, because these colors can stimulate appetite. In addition, the red light looks festive, but it is easy to make people’s blood pressure rise, breathing faster; and white light can make high blood pressure patients lower blood pressure, calm.

   As long as the right luminaires are selected, we can create a unified and flexible light and shadow space by cooperating with the whole and the local.

(provided by Shenyang Building Materials Network) <


Relevant recommended products

Poly Solar Module with IEC,TUV,CE,ISO,CEC 290W

High Silica Glass Fiber Cloth Fabric with good Quality

White PVC Foam Board in Advertising Board

180-190W Solar Energy Products OEM Solar Modules

Geotextile of PP 350g/m2 for Construccion

How does the vibrating screen work?

The vibrating screen works by reciprocating rotary vibration generated by vibrator excitation. The upper rotating weight of the vibrator causes a plane to oscillate the surface of the screen, while the lower rotating weight causes the screen surface to produce a cone-shaped rotating vibration. The combined effect of the vibrating effect causes a complex-rotating vibration of the screen surface. Its vibration trajectory is a complex space curve. The curve is projected as a circle on the horizontal plane and an ellipse on the vertical plane. Adjust the excitation force of the upper and lower rotary weights to change the amplitude. Adjusting the spatial phase angle of the upper and lower weights can change the curve shape of the screen movement trajectory and change the movement trajectory of the material on the screen surface.
The vibrating screen is mainly divided into a linear vibrating screen, a circular vibrating screen, and a high frequency vibrating screen. The vibrating screen can be divided into a single-axis vibrating screen and a two-axis vibrating screen according to the type of the vibrator. The single-axis vibrating screen uses a single unbalanced heavy excitation to vibrate the screen box, the screen surface is inclined, and the movement path of the screen box is generally circular or elliptical. The two-axis vibrating screen is a double unbalanced heavy excitation using synchronous counter-rotating, the screen surface is horizontally inclined or inclined, and the movement path of the screen box is a straight line. The vibrating screen has an inertial vibrating screen, an eccentric vibrating screen, a self-centering vibrating screen, and an electromagnetic vibrating screen.

The vibrating screen uses the vibrating motor as the vibration source, so that the material is thrown up on the screen and moves forward in a straight line. The material enters the feeding port of the screening machine evenly from the feeder. The multi-layer screen produces several sizes of oversize and undersize, which are discharged from their respective outlets. Linear vibrating screen (straight screen) has the advantages of stable and reliable, low consumption, low noise, long life, stable vibration shape and high screening efficiency. It is a new and efficient screening equipment widely used in mining, coal, smelting and building materials. , refractory materials, light industry, chemical industry and other industries.

The vibrating screen is operated by the compounding type oscillation caused by the vibration of the vibrator. The upper rotating weight of the vibrator causes the plane of the screen to oscillate, while the lower rotating weight causes the surface of the screen to reversely oscillate. The combined action causes the screen surface to oscillate repeatedly. In normal operation, how to prevent the damage of the vibrating screen bearing, let’s discuss together:
When the eccentric block of the device falls after a long time of use, or the eccentric block does not have the same size, the linear oscillating sieve exciter Symmetrical eccentric block layouts work at high speeds. Will cause the equipment to rotate abnormally. At this moment, it is necessary to replace the eccentric block layout in time, and the two tendency blocks of the linear oscillating screen are combined to work balanced. The bearings of the linear oscillating screen are prone to conflict and temperature rise after the abnormal speed. When the bearing of the linear oscillating screen is short and the smooth oil agent or smooth oil agent increases, it does not meet the equipment requirements. When the vibration screen maze sealing equipment is blocked, the bearing layout temperature rises across the regular scale value. At this moment, it is necessary to check the smooth system of the equipment in time. The smooth oil agent is hygienic enough. If the obstruction is found, the bearing should be installed for thorough sanitation; if the seal ring is damaged or the bearing is cracked after wear, the seal ring and the bearing should be replaced in time, and the linear vibrating screen should be adjusted from the head. After heavy.
(provided by Shenyang Building Materials Network) <


Relevant recommended products

*2018 New PPR Pipe Ftting For Hot Or Cold Water Cheap Solenoid Valve High Class Quality Standard

HVAC Aluminum Flexible Air Conditioning Duct Flexible Air Duct For HVAC System & Parts

PPR Pipe and Fittings Equal Tee and Reducing Tee from China

Stainless Steel Sheet 2B Surface Treatment 0.9mmx1220mmx2440mm

High Performance&Temperature Ladle Sliding Gate Steel Industry

Jingjiang City’s new outdoor project strives to create a sponge city that will “breath”

   Recently, the development units of the new residential projects such as Yuejiang House, Longxin Homeland, Greentown Chunjiang Mingyue, and Rongchuang Yulan Mansion came to the Office of the Leading Group of the Sponge City Construction and submitted the special design plan for the Sponge City. The reporter learned that Jingjiang City is fully promoting the construction of sponge city, building a new outdoor project to implement the concept of sponge city, and striving to create a sponge-shaped square, park green space, landscape water system, building and community that will “breath”, so that the city has a face with more lining.

   Advancing the construction of sponge city is an important measure to implement ecological civilization construction, an important way to improve the quality of urban construction, and an important measure to improve the living environment. The provincial party committee and the provincial government have included the construction of sponge city as an important part of the high-quality development of urban and rural areas into the indicator system, and clarified the evaluation indicators of the “standard rate of construction of sponge projects in new projects”. In 2017, the city became a provincial sponge city pilot city. In order to ensure the city’s “new project sponge city compliance rate”, the city promoted the construction of sponge city according to the “2+N” pilot program.

   The “2+N” pilot will be displayed in two pilot areas of the Old City and Binjiang New City, supplemented by multiple projects outside the district, and comprehensively promote the construction of the sponge city. The pilot zone of the old city contains the core commercial section of the old city. Through the implementation of community renovation, pipeline standardization, river improvement and other measures, the sponge city construction effect will be realized. In the Binjiang New City pilot area, according to the new development strategy of the new city, combined with the sponge city construction concept, improve the water ecological environment, improve the water network system, and construct a special activity space.

   This time, in the sponge city design special plan declared by the relevant development unit, the requirements of the “Jingjiang Sponge City Construction Implementation Plan” were strictly implemented, and more sponge elements were used. According to reports, more and more “sponge” elements of the city are now integrated into urban construction. Some buildings and communities, park green spaces, urban roads, and river water systems are all integrated into the concept of sponge city construction. The Gongxing River landscape belt and the Xiaoqiaogang landscape belt communicate with the new city water system, which improves the water surface rate, enhances the ability of water storage, water drainage and drainage, improves flood control and drainage standards, and produces a large number of aquatic plants, which are beautiful and practical. Ecological revetment greatly improves the quality of water environment and ecological functions. The station road is equipped with permeable water paving of 7464 square meters, rainwater storage facilities of 1,721 cubic meters, and biological retention facilities of 160 cubic meters. It plays a role in reducing the total runoff and pollution load on the rainfall runoff flowing into the Bagua port, and protecting the water quality of the river.

   According to the requirements of the provincial government office, new buildings with a planned land area of ​​more than 20,000 square meters should be equipped with rainwater collection and utilization facilities. This year, the city’s new residential community, Longxin Homeland, and the United States’ Yuejiang House, all plan to construct rainwater storage facilities as required. The completed phase of Country Garden Phase II Phase III, Longxinyuan Phase 1, Greentown Phase I, and Tianzhu Palace Square The pool collects rainwater sedimentation suspended matter when it rains. The treated rainwater is used for greening and cleaning the road surface, which not only saves water but also reduces runoff pollution.

<


Relevant recommended products

Direct Casting Aluminium Strip in Coils for Second Casting

High Quality Clip in Aluminum Ceiling

Solar LCD Controller with Best Price Hot Selling Model DM120A

Solar Flashlight Solar Powered Flashlight

Steel Frame Formwork GK120 with Long Time Using for Large Projects

Principles of choosing interior wall coatings

How to choose a home improvement paint that is consistent with the overall decoration style of the home room, which is both healthy and environmentally friendly, is a problem that the decorator is very concerned about.
Following the principle of material selection

The interior wall decoration coating is one of the main materials for home decoration. The selection of interior wall coating generally has the following principles:

Functional requirements

Different functional areas have different coating requirements. For kitchens, toilets and other tidal parts, paints with good water resistance should be used. The bedroom, living room and other parts should be selected with good decorative effect, fine layers, paint with certain scrub resistance, colorful paint and so on.

Consider the effect of decoration

As an interior wall paint, the decorative effect is very important. Because this is to choose a layer that is delicate and durable, the color is light and fresh, and at the same time it must be coordinated with the color of the furniture.

Consider the construction performance and construction conditions of the coating

It is generally believed that the home decoration should give priority to the one-component soluble coating, and the construction method is best to brush. These materials have low odor and are easy to operate. If solvent-based coatings are used, better ventilation is required. If you choose two-component materials, you should pay attention to the accuracy of the ratio, and the second should be used within the specified time, and can not be stored for a long time.

Select different coatings for different base layers

For example, concrete and cement base layers require good alkali resistance and opacity. Optional latex paint, scrub resistant interior paint, colorful pattern paint, etc. Do not choose melamine paint for lime and plaster walls. Non-alkaline coatings should be used on the wooden base.

Shelf life

Paint refers to the general name of various paints, but in the consciousness of ordinary owners, paint generally refers to wood lacquer, which protects the furniture surface and plays a decorative role. . Usually the most used decoration for the owners is polyester lacquer. It is a solvent-based paint made of polyester resin as the main film-forming raw material. It has a corresponding shelf life, basically 12 months after leaving the factory. The polyester paints of some well-known brands have a shelf life of 24 months after leaving the factory. When purchasing paint, consumers should first check the date and shelf life of the product packaging to prevent the purchase of paint products that have passed the expiration date or the expiration date.

Indoor coatings are selected in accordance with the five principles.

Five major selection methods

Be sure to pay attention to the following methods when purchasing paints:

1. Try to buy in the formal market or specialty store with heavy credit. It is mainly because the quality of the interior wall paints sold by these enterprises is qualified according to the results of the supervision and inspection conducted by the Municipal Quality and Technical Supervision Bureau in recent years. The rate is higher.

2. Identify the logo on the product packaging when purchasing, especially the name of the factory, the address of the factory, the product standard number, the date of manufacture, the expiration date and the product manual. It is best to purchase products that have passed ISO14001 and ISO9000 system certification. The quality of these products is relatively stable and there are no quality problems.

3. Purchasing the products that meet the “GB18582-2001 Interior Decoration Materials Interior Wall Coatings Hazardous Substances Limit” standard and the environmental certification mark.

4. When purchasing, pay attention to observe whether the packaging container of the product is damaged or swelled. When buying, shake it to check if there is any cementation. If the paint appears, you cannot buy.

5, usually most paints can not be opened on the spot to check the intrinsic quality of the products, so consumers must obtain valid invoices such as invoices and construction instructions when purchasing.

In addition, the corresponding paint can be selected according to local conditions. For example, a room with a large flow of people should use a paint with good pollution resistance, aging resistance and good color retention, such as strong stain resistance and good color retention. Wei coating and nalte interior wall coating are especially suitable for living room walls; according to the climatic characteristics, the south should use coatings with good moisture and mildew resistance; in the north, it is suitable to use low temperature and good construction coatings.
(provided by Shenyang Building Materials Network) <


Relevant recommended products

Galvanized coil in steel material SGCC hot-dipped

Grade AISI D2 Hot Rolled Steel Flat Bar with Low Price

Bulldozers SD22 SD32 Construction Crawler

Cobrahead Area/ Street Light (Mini) C0830-SR

Dump Truck (ZZ5707S3640AJ) 6*4 50~70ton